The maintenance of the radiator of the Huaquan generator is crucial for ensuring the normal operation of the generator and extending its service life. Here are some precautions for maintaining the radiator of Huaquan generator. I hope the following introduction can provide users with reference.
1、 Maintenance of Huaquan Generator Radiators
Check for leaks in the Huaquan generator
Regularly check the joints of the radiator and its connecting pipes to ensure that there are no leaks.
If a leak is found, it should be repaired immediately to prevent coolant loss and air from entering the system.
Add water and discharge air
Regularly add water from the top of the radiator and exhaust the air in the system to maintain a "no air" state.
The radiator of the Huaquan generator should not be partially filled with water, as this will accelerate the corrosion process.
Use appropriate water quality
If conditions permit, distilled water or natural soft water should be used as a coolant to reduce the formation of scale and corrosion.
Add an appropriate amount of rust inhibitor to the water to improve the corrosion resistance of the radiator.
2、 Precautions for operating Huaquan generator
Do not operate without cooling down
The radiator usually becomes very hot and pressurized during the operation of the generator set, so it is strictly prohibited to tidy up the radiator or remove the pipes before cooling.
Do not operate while the fan is rotating
Do not operate the radiator or open the fan protective cover while the fan is running to prevent accidents.
Use of pressure cap
The pressure cap installed on the water inlet of the radiator in the water tank can increase the system pressure, thereby raising the boiling point of the coolant, allowing the system to operate normally at higher temperatures and certain altitudes. At the same time, it also improves the anti cavitation ability of diesel engines and water pumps.
When the positive or negative pressure inside the radiator of the Huaquan generator water tank exceeds the specified value, the valve located in the pressure cover will automatically open to achieve the purpose of steam discharge or air entry.
In summary, the maintenance of Huaquan generator radiators requires comprehensive consideration of cleaning, checking for leaks, adding water and discharging air, using appropriate water quality, and operating precautions. Regular maintenance and upkeep can ensure the normal operation and extended service life of the radiator.
More information from Huaquan Power:http://www.wf-fadianji.com/
