Huaquan generator is a power equipment that is important for ensuring the normal operation of production and life. Therefore, its daily maintenance and upkeep must be meticulous and thorough to ensure its stable and reliable operation. The following is a detailed guide for daily maintenance and upkeep of diesel generator sets:
1、 Check the appearance and mechanical components of the Huaquan generator
Clean the outer surface of the diesel generator set, trailer, and the outside of the engine room to ensure that there are no debris, oil stains, etc. At the same time, check whether the trailer tire pressure, trailer body connection bolts, and low-noise speaker bolts are tightened. In addition, the smoke exhaust and air
inlet/outlet channels should also be kept smooth.
2、 Fuel system inspection
Ensure that the fuel level in the diesel tank is sufficient to meet the needs of the unit for 8-12 hours of operation. Check for fuel leaks and regularly replace diesel filters to ensure clean and smooth fuel supply.
3、 Huaquan Generator Lubrication System and Cooling System
Check the tension of the fan belt and charger belt, and adjust them if necessary. At the same time, check the diesel engine oil level to ensure it is within the normal range. The engine oil and oil filter should be replaced regularly to maintain good lubrication performance. In addition, check whether the antifreeze is sufficient, whether there is leakage, and regularly replace the antifreeze.
4、 Huaquan Generator Air Filter and Exhaust System
Replace or clean the air filter annually to ensure clean air entering the engine. At the same time, check whether the intake and exhaust pipes are smooth to prevent the accumulation of carbon and dirt.
5、 Electrical system inspection
Check if the voltage of the battery is normal, if the connection is secure, and if there is no corrosion. Regularly test the performance of various safety protection devices to ensure their reliable operation. In addition, it is necessary to check whether the indicators of each instrument and signal light are normal, whether the switch action is normal, and whether the monitoring alarm is normal.
6、 Huaquan Generator Debugging and Testing
Regularly debug the diesel generator set and check whether all functions are normal. Conduct a constant load operation test to check whether the output voltage, frequency, water temperature, oil pressure and other parameters meet the requirements. At the same time, pay attention to checking for any abnormal conditions such as severe vibration and abnormal noise.
Huaquan Generator More Information：http://www.wf-fadianji.com/
